From: Sandeep Ghodke (sandeep_ghodke@yahoo.com)
Date: Mon Jul 07 2003 - 12:47:43 EDT
Hello Sunmanagars,
I have two sunfire 280R servers.
And a A1000 connected to both of them.
I'm installing Raid Manager 6.22.1 on both the
servers.
I did the following steps on second server to avoid
scsi conflicts.
Now it(second server) doesn't boot. I cann't even
reach ok prompt. Screen is
black.
ok> nvedit
0: probe-all
1: cd /pci@8,60000/scsi@1
2: 6 encode-int " scsi-initiator-id" property
3: device-end
4: cd /pci@8,600000/scsi@1,1
5: 6 encode-int " scsi-initiator-id" property
6: device-end
7: install-console
8: banner [ctrl-c]
ok> setenv use-nvmrarc? true
ok> setenv local-mac-address? true
ok> boot -r
Any help is highly appreciated.
Thanks and Regards,
Sandeep
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:43 EDT