From: Gérard Gachelin (Gerard.Gachelin@univ-reunion.fr)
Date: Tue Jul 01 2003 - 17:22:55 EDT
Hello,
I just upgraded our 2 sunray servers from the 1.3 version to the 2.0.
We have 2 surray servers in the same network, the appliances are also in
side this network.
Servers are in a failover group, one is the primary server, the other is
the secondary.
I followed the SunRay Server Software 2.0 Installation and Configuration
Guide to upgrade the 2 servers.
The last step doesn't work : I can't upgrade the apliances firmware
The utfwsync command crashes :
/opt/SUNWut/sbin/utfwsync -v
Stopping Authentication Managers on gala
gaia ...
Stopping host 'gala'
Error: Must specify either the network interface(s) orthe subnetwork
address(es) upon which upgrades will be done
usage: /opt/SUNWut/sbin/utfwadm {-A|-D|-P|-R} {-a|-e enetAddr} [-f
firmware] {-n intf | -N subnet} ...
-A # add the specified unit(s) to the upgrade list
-D # delete the specified unit(s) from the upgrade list
-P # print version information
-R # remove firmware modules from boot directory
-a # apply to all units
-e enetAddr # apply to the unit given by the six hex bytes
# of its ethernet address
-n intf # name of a decidated network interface to enable
upgrades on
# (e.g., hme0, vge1, etc. "all" = all interfaces)
-N subnetwork # shared subnetwork address to enable upgrades on
etc...
It appears that utfwsync calls utfwadm but utfwadm didn't get the right
paramaters.
Thanks for any help
-- Gerard Gachelin Universite de la Reunion - CSI 15, Avenue Rene Cassin - BP 7151 97715 Saint-Denis MESSAG-CEDEX 9 Tel: 0262 93 82 72 Fax: 0262 93 82 60 Email : Gerard.Gachelin@univ-reunion.fr _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:41 EDT