From: Hackett, Peter (PHackett@talisman-energy.com)
Date: Fri May 16 2003 - 14:11:40 EDT
All,
I have a Blade 2000 Sol-8 with two XVR-1000 frame buffers..
There used to be two 21" CRTs attached but I've switched one out for a 24"
wide screen CRT.
I'm trying to set the resolution to SUNW_STD_1920X1200X75 with:
fbconfig -dev /dev/fbs/gfb0 -stream a -res SUNW_STD_1920X1200X75 try
which sort of works, but when it changes, the resulting image is small,
probalby half the size of what it should be to fill the screen. I've hit
reset on the monitor as well, so it's not custom sizing which is causing the
small image.
How can I set the resolution properly to fill this beast of a CRT?
Any thoughts appreciated.
Peter
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:25 EDT