From: Sun Consultant (sun_consultant@hotmail.com)
Date: Mon May 12 2003 - 20:29:26 EDT
Hi I have 2 Sun V880r's..
I installed the O/S on one boot disk, then made a duplicate of the boot disk
using ufsdump/ufsrestore/installboot, and moved the disk to the second V880R.
I am unable to boot the copied disk on the second one. I think it has
something to do with the Fibrechannel addressing.
This would work perfectly on a SCSI based E420R or other server..but does not
work on this server....
any ideas?
Rebooting with command: boot -r
Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@0,0 File and args: -r
SunOS Release 5.8 Version Generic_108528-20 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
configuring IPv4 interfaces: eri0.
Hostname: erp01
/dev/dsk/c1t0d0s1: No such device or address
The / file system (/dev/rdsk/c1t0d0s0) is being checked.
Can't open /dev/rdsk/c1t0d0s0
/dev/rdsk/c1t0d0s0: CAN'T CHECK FILE SYSTEM.
/dev/rdsk/c1t0d0s0: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
WARNING - Unable to repair the / filesystem. Run fsck
manually (fsck -F ufs /dev/rdsk/c1t0d0s0). Exit the shell when
done to continue the boot process.
Type control-d to proceed with normal startup,
(or give root password for system maintenance):
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:23 EDT