From: Anshuman Kanwar (anshuman@expertcity.com)
Date: Thu May 08 2003 - 20:53:02 EDT
I have 2 420R's I am trying to get qlogic HBA's to work on.
On the first system Slot1 seems to be running at 66MHz. The QLC card seems
to be correctly detected and the ifp driver takes over.
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---------- ----------------------------
--------------------
0 PCI 33 On-Board network-SUNW,hme
0 PCI 33 On-Board scsi-glm/disk (block) Symbios,53C875
0 PCI 33 On-Board scsi-glm/disk (block) Symbios,53C875
0 PCI 33 pcib slot 4 SUNW,hme-pci108e,1001 SUNW,qsi-cheerio
0 PCI 66 pcia slot 1 pci-pci8086,b154/scsi (scsi) pci-bridge
0 PCI 66 pcia slot 1 scsi-pci1077,1016/sd (block) QLGC,ISP10160
0 PCI 66 pcia slot 1 scsi-pci1077,1016/sd (block) QLGC,ISP10160
On the other system though, PCI1 which is claimed to be a 66MHz slot seems
to be running on 33MHZ and I am guessing that to be reason for the card to
be seen but not initialized.
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---------- ----------------------------
--------------------
0 PCI 33 On-Board network-SUNW,hme
0 PCI 33 On-Board scsi-glm/disk (block) Symbios,53C875
0 PCI 33 On-Board scsi-glm/disk (block) Symbios,53C875
0 PCI 33 pcib slot 4 SUNW,hme-pci108e,1001 SUNW,qsi-cheerio
0 PCI 33 pcia slot 1 scsi-pci1077,1
IS there a way to tweak the speed of Slot1 ?
This is the same ISP2100A card I was trying to insert into the 280R earlier
in the day.
Thanks again,
-ansh
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:22 EDT