From: Nicole Skyrca (nskyrca@syr.edu)
Date: Tue May 06 2003 - 14:33:22 EDT
Sorry for the spam... I wanted to clarify something in my original question.
I was able to reboot my sparc 4 using the "init 6" command while the
"auto-boot?" variable was set to false.
Hello,
I have two questions:
1) We have a requirement that our machines will only go to an "ok" prompt
when
the power comes on after a poweroutage. I would still like to be able to do
a normal reboot of the machine. I originally thought that if you set the
eeprom variable "auto-boot?" to false, I would not be able to do a normal
reboot of the machine. I tested setting the prom variable "auto-boot?" to
false on a sparc4, and I was sucessful in rebooting it. Is this the
expected
behavior when setting "auto-boot?" to false, so my original understanding was
incorrect? Does anyone know if this works the same for all Suns, like
Sparc4,5, 10, E250, Ultra1?
2) Does anyone have any recommendations for or against setting the eeprom
variable "watchdog-reboot?" to true? I'm concidering setting this to true so
the machine will reboot if there is a watchdog reset.
If I have "auto-boot?" set to false, "watchdog-reboot?" to true, and a
watchdog reset occurs, will the system just stay at the ok prompt because the
system did a reset. Will the "auto-boot?" variable have precidence over the
"watchdog-reboot?" variable? (Does that make any sense?)
Thanks!
Nicole
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:21 EDT