From: Wilkinson,Alex (Alex.Wilkinson@dsto.defence.gov.au)
Date: Mon Apr 22 2002 - 04:18:53 EDT
Howdy all,
I have a SPARC5 with Solaris 8 2/02. I have attached a Seagate Barracuda 18XL
(ST39216N) SCSI HD. It is in a Kingston Data Silo chassis.
It is set to SCSI ID 0. And is the only SCSI dev on the bus.
The problem:
When I do a: "probe-scsi-all" from the PROM Target 0 is detected, with...however,
multiple LUNs. The PROM seems to think that there are 8 LUNs (0-7), with each LUN being
the entire Taget 0 (the HD).
Does anyone know why the PROM would report back multiple LUNs for a hard disk ??
Thanks
- Alex
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:14 EDT