SUMMARY: how do I set sunblade eri interface?

From: Jonathan Burelbach (jburelba@topaz.cit.nih.gov)
Date: Wed Apr 17 2002 - 09:08:41 EDT

Next message: mike.salehi@kodak.com: "How to replace a root disk with bigger drive (disksuite)"
Previous message: JESSE CARROLL: "Really large memory models and i/o performance"
In reply to: Jonathan Burelbach: "how do I set sunblade eri interface?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks to Joachim Krumlinde, Lars Hecking, Naxhije Selimaj, and Tommy Fallsen
who all answered within 5-10 minutes. The correct stanza is:

  set eri:adv_100T4_cap=0
  set eri:adv_100hdx_cap=0
  set eri:adv_10fdx_cap=0
  set eri:adv_10hdx_cap=0
  set eri:adv_100fdx_cap=1
  set eri:adv_autoneg_cap=0

Tommy also sent the command I could have used to figure this out
if I wasn't trying to work before I had my coffee:
  ndd -get /dev/eri \?
  < cut >
  adv_autoneg_cap (read and write)
  adv_100T4_cap (read and write)
  adv_100fdx_cap (read and write)
  adv_100hdx_cap (read and write)
  adv_10fdx_cap (read and write)
  adv_10hdx_cap (read and write)
  < cut >

Thanks again.

Jon

On Wed, Apr 17, 2002 at 08:48:55AM -0400, Jonathan Burelbach scribbled:
> How do I set the network interface on the sunblade 100 to 100Full? I've
> tried the same stanza in /etc/system as I've used on hme's, but it claims
> "sorry, variable 'eri_adv_100hdx_cap' is not defined in the 'eri' module"
>
> Here's the stanza:
> set eri:eri_adv_100T4_cap=0
> set eri:eri_adv_100hdx_cap=0
> set eri:eri_adv_10fdx_cap=0
> set eri:eri_adv_10hdx_cap=0
> set eri:eri_adv_100fdx_cap=1
> set eri:eri_adv_autoneg_cap=0
>
> TIA,
> Jon
>
>
> --
> =========+=========+=========+=========+=========+=========+=========+
> Jonathan Burelbach jburelba@mail.nih.gov
> Unix Systems Administrator jburelba@topaz.cit.nih.gov
> NIH/CIT/DCSS/SOSB;12 South Dr.;Bldg 12B/2N207;Bethesda (301) 496-7372
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers

-- 
=========+=========+=========+=========+=========+=========+=========+
Jonathan Burelbach                               jburelba@mail.nih.gov
Unix Systems Administrator                  jburelba@topaz.cit.nih.gov
NIH/CIT/DCSS/SOSB;12 South Dr.;Bldg 12B/2N207;Bethesda  (301) 496-7372
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Next message: mike.salehi@kodak.com: "How to replace a root disk with bigger drive (disksuite)"
Previous message: JESSE CARROLL: "Really large memory models and i/o performance"
In reply to: Jonathan Burelbach: "how do I set sunblade eri interface?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:13 EDT