From: Jonathan Burelbach (jburelba@topaz.cit.nih.gov)
Date: Wed Apr 17 2002 - 08:48:55 EDT
How do I set the network interface on the sunblade 100 to 100Full? I've
tried the same stanza in /etc/system as I've used on hme's, but it claims
"sorry, variable 'eri_adv_100hdx_cap' is not defined in the 'eri' module"
Here's the stanza:
set eri:eri_adv_100T4_cap=0
set eri:eri_adv_100hdx_cap=0
set eri:eri_adv_10fdx_cap=0
set eri:eri_adv_10hdx_cap=0
set eri:eri_adv_100fdx_cap=1
set eri:eri_adv_autoneg_cap=0
TIA,
Jon
-- =========+=========+=========+=========+=========+=========+=========+ Jonathan Burelbach jburelba@mail.nih.gov Unix Systems Administrator jburelba@topaz.cit.nih.gov NIH/CIT/DCSS/SOSB;12 South Dr.;Bldg 12B/2N207;Bethesda (301) 496-7372 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:13 EDT