From: Robert L. Harris (Robert.L.Harris@rdlg.net)
Date: Tue Apr 09 2002 - 17:45:33 EDT
I have a hot one that's driving a co-worker nuts. I've done this before
but the answer is just out of range.
System A:
hme0: inet=10.10.117.230
gw=10.10.117.1
qfe:
qfe2= 10.10.87.254
We're trying to use the gateway 10.10.87.249, a router attached to
qfe2 to connect to a box 10.10.86.43. 86.43 is connected to the
router off qfe2.
We've tried a host route, /etc/gateways and a netroute to 86 through
qfe2 but traceroutes are still showing through the hme0, not qfe2.
Due to the traffic we're sending as well as the ammount we don't want to
use the hme0 interface.
Suggestions?
:wq!
---------------------------------------------------------------------------
Robert L. Harris | Micros~1 :
Senior System Engineer | For when quality, reliability
at RnD Consulting | and security just aren't
\_ that important!
DISCLAIMER:
These are MY OPINIONS ALONE. I speak for no-one else.
FYI:
perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:11 EDT