From: Neil Paniraj (npaniraj@yahoo.com)
Date: Thu Jun 29 2006 - 11:46:39 EDT
Fellow SAs:
I built two vpars on a NPAR. The second vpar was
ignited using the image of the 1st one. For some
reason the Boot Disks of both these vpars have the
same cXtYdZ numbers. (c6t0d0)
The hardware paths are different. Therefore I am safe.
But, I'd feel comfortable if I have different ctd
numbers as it is easy to differentiate.
If I have to change the boot disk (and all related
paths) from c6t0d0 to c14t0d0 etc. etc. is it
possible? Does some one have the procedure to do that?
Any help would be most appreciated.
-NEIL
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:53 EDT