From: brian irvin (brian944us@yahoo.com)
Date: Wed Jun 21 2006 - 07:53:47 EDT
Thanks to Bill Hassell who was the only one to
respond. see below..
There is no error. It is just an advisory message that
you
should be using an HP terminal like the 700/9x series.
However, if you are not using an HP terminal, you need
to
make a choice:
1) Find an HP terminal. It will work best not only
for
Ignite/UX but for interfaces such as SAM and
swinstall
and Glance.
2) Assuming you are using a dumb terminal or
emulator on
a PC that looks like a DEC VT-series terminal,
you need
to change the GSP (or MP on IA64 machinhes) so
that the
console setting is for vt terminal type.
Bill
Thanks
Brian.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-- ---> Please post QUESTIONS and SUMMARIES only!! <--- To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only) http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:53 EDT