From: Justin Willoughby (jwilloug@mhc.net)
Date: Wed Nov 17 2004 - 13:06:07 EST
Is the card using jumbo frames (I think thats what they are called)? I had this problem with some AIX servers and gig lan cards. Our network switches at the time could not handle the jumbo frames. Just an idea. I had to disable the lan card driver from using the jumbo frames to keep the cards from dyeing.
- Justin
==================
Justin Willoughby
Computer Operations
==================
>>> "Johnson, Craig E" <craig.johnson@siemens.com> 11/17/2004 11:27:35 AM >>>
Bookmarking. I have a simlar issue with an N4000 with multiple (seven)
LAN's with three active. The GBE interface, which is supposed to be the
primary, will fail after running a short time, and I have had to use the
100BT LAN instead. HP replaced the GBE card at one point, it ran OK for a
couple days, then quit. If I run the GBE as a non-routed secondary on an
upublished IP address, it works fine.
Craig
_____
From: hpux-admin-owner@DutchWorks.nl [mailto:hpux-admin-owner@DutchWorks.nl]
On Behalf Of BAKHSHESH Kazem
Sent: Wednesday, November 17, 2004 3:38 AM
To: 'hpux-admin@dutchworks.nl'
Subject: [HPADM] Networking problem
Hi admins,
I have recently installed 11.00. I have 3 network cards but only 2 cards are
active. This configuration
worked and was stable on 10.20.
Why the connexion by lan0 is not stable, I means that the connexion is lost
after somes minutes.
My searched was to install PHNE_26125 and PHNE_27886 which I did but the
problem present.
Thanks for your help
Cordialement(Best regards)
Kazem Bakhshesh(Administrateur Système : HP-UX)
E-Mail : bakhshek@essilor.fr <mailto:bakhshek@essilor.fr>
Tel : 01.72.94.73.09
-- ---> Please post QUESTIONS and SUMMARIES only!! <--- To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only) http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:44 EDT