From: Stephanie Chung (stepchung@yahoo.com)
Date: Thu Jun 10 2004 - 15:06:19 EDT
Thanks to:
Rick Jones
Ted.Fisher@dana.com
Lonski, James
Bill Beardshaw
Wright, Richard
Kelly Choo
--- Ted.Fisher@dana.com wrote:
> An A500 holds a max of 2 CPU's and 8 GB memory.
> HP's web site shows
> configuration for each server with max memory and
> CPU allowable. To see
> how much memory is in the system currently you can
> use STM. What is also
> important is what size DIMMs are in the system. An
> A class has 8 memory
> slots that have to be populated 2 at a time (it's
> actually four pairs). So
> you get a pair of 512 MB DIMMs in a 1 GB module. If
> the current 1 GB is
> 512 MB DIMM's then they've only used 1 pair of
> slots, leaving 3 open. If
> you add 1 GB modules (pairs of 512s) then you can
> only add three more. If
> you add 2 GB modules you can get up to 6 GB more.
> STM shows you a map of
> the slots. There are three STM interfaces: command,
> menu, and GUI (X). I
> rarely use anything but the command interface, so I
> can only show you how
> to use that:
>
> from prompt as root:
> cstm # you get a cstm> prompt after a
> minute of loading
> run "map" command from cstm> prompt
> the map command to get map of the system
> devices
> locate the MEMORY device
> 16 8 MEMORY (9b)
> Information
> Successful
> select memory by typing "sel dev 16"
> run the inof command to get memory info:
> "info"
> use the ifnolog command to view the info:
> "il"
>
> Here is my SCTM session to loook at memory on an A:
> croot@htgapt04:/root # cstm
> Running Command File
> (/usr/sbin/stm/ui/config/.stmrc).
> -- Information --
> Support Tools Manager
> Version A.26.05
> Product Number B4708AA
> (C) Copyright Hewlett Packard Co. 1995-2001
> All Rights Reserved
> Use of this program is subject to the licensing
> restrictions described
> in "Help-->On Version". HP shall not be liable for
> any damages resulting
> from misuse or unauthorized use of this program.
> cstm>map
> htgapt04.dana.com
> Dev
> Last Last Op
> Num Path Product
> Active Tool Status
> === ====================
> ========================= ===========
> =============
> 1 system system ()
> Information
> Successful
> 2 0 Bus Adapter (582)
> 3 0/0 PCI Bus Adapter (782)
> 4 0/0/0/0 Core PCI 100BT Interface
> 5 0/0/1/0 PCI SCSI Interface
> (10000
> 6 0/0/1/1 PCI SCSI Interface
> (10000
> 7 0/0/1/1.15.0 SCSI Disk (HP146)
> Information
> Successful
> 8 0/0/2/0 PCI SCSI Interface
> (10000
> 9 0/0/2/1 PCI SCSI Interface
> (10000
> 10 0/0/2/1.15.0 SCSI Disk (HP146)
> Information
> Successful
> 11 0/0/4/0 Unknown ()
> 12 0/0/4/1 RS-232 Interface
> (103c104
> 13 0/2 PCI Bus Adapter (782)
> 14 0/4 PCI Bus Adapter (782)
> 15 0/6 PCI Bus Adapter (782)
> 16 8 MEMORY (9b)
> Information
> Successful
> 17 160 CPU (5e3)
> Information
> Successful
> 18 162 CPU (5e3)
> Information
> Successful
> cstm>sel dev 16
> cstm>info
> -- Updating Map --
> Updating Map...
> cstm>il
> -- Converting a (1820) byte raw log file to text. --
> Preparing the Information Tool Log for MEMORY on
> path 8 File ..
> .... htgapt04.dana.com : 159.235.183.50 ....
> -- Information Tool Log for MEMORY on path 8 --
> Log creation time: Thu Jun 10 12:53:02 2004
> Hardware path: 8
> Basic Memory Description
> Module Type: MEMORY
> Total Configured Memory : 6144 MB
> Page Size: 4096 Bytes
>
> Memory interleaving is supported on this machine
> and is ON.
>
> Memory Board Inventory
>
> DIMM Slot Size (MB)
> --------- ---------
> 01 1024
> 02 1024
> 03 1024
> 04 1024
> 05 512
> 06 512
> 07 512
> 08 512
> --------- ---------
> System Total (MB): 6144
>
> Memory Error Log Summary
>
> The memory error log is empty.
>
> Yuo can get an idea from this how the memory is
> viewed in STM. To quit
> STM type "q"
>
> Hope this helps.
>
> Ted F. Fisher
> Dana Corporation
> Global Information Technology Group
> Systems Management Team
> Ted.Fisher@dana.com
>
>
>
>
> Stephanie Chung <stepchung@yahoo.com>
> Sent by: hpux-admin-owner@DutchWorks.nl
> 06/10/2004 12:27 PM
>
>
> To: hpux <hpux-admin@dutchworks.nl>
> cc:
> Subject: [HPADM] Memory slot
>
> I am in process of ordering more memory for HP-UX
> A500. Currently it has 1gb memory. But before doing
> that, I would like to find out some information.
> 1. How do I know if I have available slots for more
> memory dimms without shutdown and open the server?
> 2. How do I find out what is the max memory, cpu I
> can
> have in this server?
>
> Thanks.
>
> Stepahnie Chung
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Friends. Fun. Try the all-new Yahoo! Messenger.
> http://messenger.yahoo.com/
>
> --
> ---> Please post QUESTIONS and
> SUMMARIES only!! <---
> To subscribe/unsubscribe to this list,
> contact
> majordomo@dutchworks.nl
> Name: hpux-admin@dutchworks.nl Owner:
> owner-hpux-admin@dutchworks.nl
>
> Archives:
> ftp.dutchworks.nl:/pub/digests/hpux-admin
> (FTP, browse
> only)
>
> http://www.dutchworks.nl/htbin/hpsysadmin (Web,
> browse & search)
>
>
>
=== message truncated ===
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:41 EDT