From: Paul.Soltermann@vonroll-isola.com
Date: Fri Jan 23 2004 - 06:48:30 EST
Hallo admins,
I try to connect a "ELSA MicroLink 56k" as a support modem on the "remote"
line of the serial port.
Server type 9000/800/L3000-RP5470, HP-UX 11.0.
I read the SUMMARY: How do you connect a modem to an L-class ? I followed
the step-by-step description, the problem appeared when I tried to reset
the modem.
GSP> mr
--> Modem reset filed
(Config Settings)
Local Console Serial Port bit rate: 9600 bits/s
Local Console Serial Port Flow Control: Software
Local Console Serial Port Terminal Type: hpterm
Remote Console Serial Port Modem Protocol: CCITT
Remote Console Serial Port Modem bit rate: 19200 bits/s
Remote Console Serial Port Modem Flow Control: Software
Remote Console Serial Port Modem Transmit Configuration Strings: Enabled
Remote Console Serial Port Modem Presence: always connected
Any idea ?
Paul Soltermann, Isola Werke AG, CH-4226 Breitenbach
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:38 EDT