From: Abramson, Stuart (SAbramson@Wabtec.com)
Date: Wed Dec 31 2003 - 10:50:23 EST
EMC List:
I have to present 96 BCVs to our servers for a new system.
I normally do this with the "symconfigure" command in UNIX, since it's just
too hard to "click" add them with ECC/SDR, one click at a time to two
different FA ports.
The symconfigure command file looks like this:
##
# acshps05:~saroot/.../emc/add_devs.cmd SDA
05/28/03
#
# Use symconfigure to present new HVs:
#
# symconfigure preview -file add_bcvs.cmd
# # symconfigure prepare -file add_bcvs.cmd
# symconfigure commit -file add_bcvs.cmd
#
# One group for each of three access paths:
map dev 171 to dir 03a:0, vbus=0, target=7, lun=5;
map dev 172 to dir 03a:0, vbus=0, target=7, lun=6;
map dev 18E to dir 03a:0, vbus=0, target=7, lun=7;
map dev 18F to dir 03a:0, vbus=0, target=8, lun=0;
map dev 190 to dir 03a:0, vbus=0, target=8, lun=1;
Is there a limit to what vbus numbers I can use? In HP-UX? I have never
gone any higher that "vbus=2".
I saw a man page example with "vbus=0A"..
I would like to put all of this set of BCVs on the same vbus-s, which in my
case would make me use a vbus of 3 or 4.
I'm assuming that they don't have to be sequential.
Stuart
Stuart Abramson | Off: 412/825-1434 | Cell: 412/417-1567 | email:
sabramson@wabtec.com
***** CONFIDENTIALITY NOTE *****
The content contained in this e-mail transmission is legally privileged and confidential information intended only for the use of the individual or entity named herein. If the reader of this transmission is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this transmission is strictly prohibited.
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:38 EDT