From: Joseph Wright (jwright@mbakercorp.com)
Date: Mon Jul 07 2003 - 10:19:53 EDT
I am once again looking into the dual nics on hpux but this time I have
two addon 100 mbit nics and lan0(10m) is disabled.
The issue is my primary nic lan1 192.168.200.200 works perfect and the
default gateway is set to 192.168.200.254
Lan2 is on a 172.164.42.0 network but cannot ping any device even one on
the same subnet. Aynal Hossain hit on something when he had me do a
linkloop. Here is the status of linkloop.
root@hp9k> lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI
DLPI
Path Address In# State NamePPA ID Type Support
Mjr#
10/12/6 0x0060B0831ADC 0 UP lan0 snap0 1 ETHER Yes
119
10/4/4 0x080009D79025 1 UP lan1 snap1 2 ETHER Yes
119
10/4/8 0x0010839610B6 2 UP lan2 snap2 3 ETHER Yes
119
root@hp9k> linkloop 0x080009D79025
Link connectivity to LAN station: 0x080009D79025
error: expected primitive 0x30, got DL_ERROR_ACK
dl_error_primitive = 0x2d
dl_errno = 0x04
dl_unix_errno = 57
error - did not receive data part of message
root@hp9k> linkloop 0x0010839610B6
Link connectivity to LAN station: 0x0010839610B6
error: expected primitive 0x30, got DL_ERROR_ACK
dl_error_primitive = 0x2d
dl_errno = 0x04
dl_unix_errno = 57
error - did not receive data part of message
I have tried several suggested posts on routing and subnets but no
matter what that second nic does not want to work. It can ping it self
with no problem and all cables are good so any suggestions would be
appreciated.
thanks
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:31 EDT