From: Julius Szelagiewicz (julius@turtle.com)
Date: Tue May 13 2003 - 16:31:00 EDT
Dear Admins,
I have a problem, that is obviously due to my lack of
understanding of networking, maybe you can help me:
My production L2000, UX11.0 is connected on two of the ether
interfaces to two separate T1 lines, each with a different ISP. The
connections go through firewalls. FIrewalls allow the ssh in and also
support SSL tunnelling. The access is easy and fast on the line that is
designated as "default" route. There is no access over the othe T1,
because packets go in on it, but go out over the default route.
What can I do to be able to access the box on either of the lines?
This becomes a problem when the line designated as default, or the
firewall on this line fails. Here I am with two lines and I still can not
get in. If I have access to the box, I can easily change the default route
and everything is hunky-dory. Tia, julius
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:29 EDT