From: Whittemore, Dale (dale.whittemore@lmco.com)
Date: Thu Apr 03 2003 - 09:00:08 EST
I am attempting to start the ups_mond daemon on 11.0 on a rp5430 server. I
used 'sam' to set it up and now, when I let the daemon run, I get tons of
the following message in the syslog and on the console.
Apr 3 05:56:56 fmddev /usr/lbin/ups_mond[18595]: /usr/lbin/ups_mond: AC
Power t
o all recognized, system critical UPS's OK! System will not shutdown.
Apr 3 05:57:03 fmddev above message repeats 5770 times
The server has version B of GSP and the Powertrust monitor cable is
connected to the "W" cable connector labeled "UPS". I had to disable the
ups_mond daemon in order to stop all the messages.
The 'ups_conf' file has the upstty as being /dev/tty0p2 which is enabled in
the 'inittab' file.
All documentation says version B of the GSP has the path for the UPS at
0/0/4/1.1
Is there anyway to stop this output? I configured EMS so that it only
notifies me of any UPS problem on a MAJOR WARNING or above and then to email
root when that happens.
Thanks
Dale A. Whittemore
Computer Systems Analyst, Senior
Lockheed Martin Enterprise Information Systems
Denver, Colorado
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:28 EDT