From: Mark Schupsky (mark.d.schupsky@lmco.com)
Date: Fri Feb 07 2003 - 12:43:52 EST
Apparently the best you can do is get information from setboot (no options). It will tell
you which device
is primary boot, alternate boot and if fastboot and autosearch are enabled. The other
information on
LanConfig and Paths is not available except at/during boot.
Thanks to:
Wolf-Dietrich Schmook
Tim.Pickel
JBreger
Craig.E.Johnson
Mike.Keighley
Rita Workman
Bill Hassell
--
Mark Schupsky mark.d.schupsky@lmco.com
EIS UNIX SysAdmin Lockheed Martin CSS Newtown, PA
--
Mark Schupsky wrote:
> Responses include information on which disk is used to boot (setboot command) and lif
> commands? for mass storage
> information. I'm interested in all the options under the COnfiguration menu. i.e.
>
> Autoboot
> BootID
> FastBoot
> Search
> LanConfig
> Console,Keybd,Boot Paths
>
> Thanks.
>
> --
> Mark Schupsky mark.d.schupsky@lmco.com
> EIS UNIX SysAdmin Lockheed Martin CSS Newtown, PA
> --
>
> Mark Schupsky wrote:
>
>> Anyone know of a way to view the boot information available from the COnfiguration
>> menu at the BOOT_ADMIN prompt
>> of a 10.20 (or later) K box (or other) while the machine is booted?
>> --
>
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:26 EDT