[HPADM] Re: HP B132L+ Can't Boot Normally After lvextend

From: Quy NGUYEN DAI (Quy.NguyenDai@gdtech.net)
Date: Tue Dec 17 2002 - 06:21:38 EST


Guan, Ping (Penney) wrote:
> Hello,
>
> We have an HP B132L+ workstation with HP-UX 10.20 installed. Here is what I
> have done with it and the problem:
>
> 1. Extended a file system with commands lvextend and extendfs (I did not
> enter into single user mode before doing this).
> 2. After reboot, can not startup.
> 3. Boot from CD-ROM, at ISL prompt, enter 700support menu, rebuild only the
> bootlif.
> 4. Reboot the host, here is the excerpt of the output:
> /dev/vg00/lvol1: CAN'T CHECK FILE SYSTEM
> /dev/vg00/lvol1: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY
> /dev/vg00/lvol1: No such device address
> Unable to mount /stand - please check entries in /etc/fstab

What is the output of following command:
# grep stand /etc/fstab

-- 
Quy NGUYEN DAI
GDTech S.A.
Parc Scientifique du Sart-Tilman
Rue des Chasseurs-Ardennais
B-4031 Angleur, BELGIUM
Tel: +32-(0)4-367.87.11
--
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner: owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse & search)


This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:23 EDT