From: Green, Simon (Simon.Green@EU.ALTRIA.COM)
Date: Wed Mar 10 2004 - 04:43:43 EST
The fastest way to figure out what the problem is, is via the s1term: see
what it's prompting for. Otherwise you just end up running lots of
nodeconds until you finally hit on the problem.
However...
Did you re-set the bootlist after you unmirrored rootvg? What disks was hd5
on?
Generally, IBM advice using the hardware address for rootvg disks in the
SDR. You might try changing it to use these, just in case.
-- Simon Green Altria ITSC Europe Ltd AIX-L Archive at https://new-lists.princeton.edu/listserv/aix-l.html New to AIX? http://publib-b.boulder.ibm.com/redbooks.nsf/portals/UNIX N.B. Unsolicited email from vendors will not be appreciated. Please post all follow-ups to the list. > -----Original Message----- > From: fmu@OERAG.DE [mailto:fmu@OERAG.DE] > Sent: 10 March 2004 08:44 > To: aix-l@Princeton.EDU > Subject: Antwort: Re: Antwort: Re: SP nodes hangs during > migration on LED c48 [Virus checked] > > > yes. But it is not normal that the node needs an input by a > migration. It > must be an configuration problem on node or/and SDR > > I think so......
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:41 EDT