From: Darryl Ousterhout (D.Ousterhout@LABSAFETY.COM)
Date: Thu Feb 26 2004 - 08:55:06 EST
Excellent! I'll give that a try.
Thanks for the help.
-Darryl
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
Jason delaFuente
Sent: Wednesday, February 25, 2004 4:14 PM
To: aix-l@Princeton.EDU
Subject: Re: SAN Adapter Stats
Never used nmon before. I'll check it out.
Thanks!
Jason de la Fuente
>>> Pablo.Clifton@BCBSFL.COM 02/25/04 03:54PM >>>
Jason-
Try nmon from IBM (select "a" for adapter) and you will see output like:
nmon v7a Hostname=host1 Refresh=2.0secs 16:51.37
Adapter I/O read write xfers Disks Adapter
Type
fscsi0 1j-08-01 511.7 0.0 KB/s 16.0 21 FC SCSI I/O
Controller Protocol Device
fscsi1 14-08-01 495.7 0.0 KB/s 15.5 21 FC SCSI I/O
Controller Protocol Device
TOTALS 1009.4 0.0 KB/s 32.0 TOTAL= 1009.4
More details are available in the "IBM ESS800 Perf and Monitor Guide":
http://publib-b.boulder.ibm.com/Redbooks.nsf/RedpieceAbstracts/sg246422.
html?Open
-pablo
--- Pablo Clifton UNIX Technical Services (904) 905-7113 (904) 588-4399 cell -----Original Message----- From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of Jason delaFuente Sent: Wednesday, February 25, 2004 4:41 PM To: aix-l@Princeton.EDU Subject: Re: SAN Adapter Stats If you are using the McData EFC Manager you can see all of the traffic at the switch port level by clicking on the switch/director, then going to the performance tab. Jason de la Fuente >>> D.Ousterhout@LABSAFETY.COM 02/25/04 03:19PM >>> Is there any way to get throughput statistics on my fcs0 and fcs1 adapters? This is on a P690 with both adapters attached to McData switches and then on to our ESS800. Thanks -Darryl Blue Cross Blue Shield of Florida, Inc., and its subsidiary and affiliate companies are not responsible for errors or omissions in this e-mail message. Any personal comments made in this e-mail do not reflect the views of Blue Cross Blue Shield of Florida, Inc. The information contained in this document may be confidential and intended solely for the use of the individual or entity to whom it is addressed. This document may contain material that is privileged or protected from disclosure under applicable law. If you are not the intended recipient or the individual responsible for delivering to the intended recipient, please (1) be advised that any use, dissemination, forwarding, or copying of this document IS STRICTLY PROHIBITED; and (2) notify sender immediately by telephone and destroy the document. THANK YOU
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:38 EDT