From: jeff barratt-mccartney (jbarratt@COMPSAT.COM)
Date: Wed Feb 25 2004 - 11:34:39 EST
don't know about the scsi card. what model?
Here is an PCI ethernet (A-F)FC 4962 33Mhz 10/100 in a p650 pci-x slot. btw.
this is from an IBM express config
Name: ethernet
Node: ethernet@1
Device Type: network
Physical Location: U0.2-P1-I6/E1
working as expected
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
cbaker@GOODYEAR.COM
Sent: Wednesday, February 25, 2004 11:00 AM
To: aix-l@Princeton.EDU
Subject: Re: Emulex LP 9002
Importance: High
Interesting?
Late last year, we wanted to put a PCI SCSI card, we had once running in an
H70, into a new IntelliStation Power 275 (9114-275) but found that the PCI
card would not fit the PCI-X slots in the P275. So, we assumed that old
PCI cards would not work in newer systems with PCI-X slots.
Are we in error? Did we need some kind of adapter?
Christopher M. Baker
Senior Technical Support Analyst
DSE/TCO
Goodyear Tire and Rubber Company
=================================================
Contains Confidential and/or Proprietary Information.
May not be copied or disseminated without the expressed
written consent of The Goodyear Tire & Rubber Company.
=================================================
jeff
barratt-mccartne To: aix-l@Princeton.EDU
y cc: (bcc: Chris
Baker/NA/GDYR)
<jbarratt@COMPSA Subject: Re: Emulex LP 9002
T.COM>
Sent by: IBM AIX
Discussion List
<aix-l@Princeton
.EDU>
02/25/04 08:26
AM
Please respond
to IBM AIX
Discussion List
yes. PCI-X is backwards compatible with PCI
btw. I believe if you put the LP9002L card in a 32bit slot, it will
negotiate at 1GB/sec also:
remember that any PCI-X bus you put a card into will operate down to the
lowest common denominator, so if you put a 33Mhz card in a PCI-X slot, all
cards on that bus will run at 33Mhz
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
Ayman Rayyan
Sent: Wednesday, February 25, 2004 7:18 AM
To: aix-l@Princeton.EDU
Subject: FW: Emulex LP 9002
Dear all:
I had found the compatible HBA card which is Emulex LP9002L & its
supported by AIX 5.1, my notice is that this is a PCI 32 or 64 bit card
while 650 & 630 are PCI-X, so does PCI-X slots supporting PCI cards ?
-----Original Message-----
From: Ayman Rayyan
Sent: Wednesday, February 25, 2004 12:48 PM
To: aix-l
Subject: Emulex LP 9002
Dear All:
An any Pls. help to find the compatible emulex HBA to connect 650 & 630
to symmetrix 8730 EMC storage ?
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:37 EDT