Re: hacmp. whats wrong here?

From: jeff barratt-mccartney (jbarratt@COMPSAT.COM)
Date: Tue Feb 10 2004 - 16:55:36 EST

oops. it was a typo..aix2 box en0 should be x.x.x.14.
it appears that I need another subnet for service address under 5.1. thanks
ferenc!

-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
Green, Simon
Sent: Tuesday, February 10, 2004 4:54 AM
To: aix-l@Princeton.EDU
Subject: Re: hacmp. whats wrong here?

I'm not familiar with HA v5, so can't offer much help. However...
Both of your en0s appear to have the same IP address. Is that the case, or
simply a typo?
If you don't get anywhere, try the HACMP group on Yahoo. 

--
Simon Green
Altria ITSC Europe Ltd
AIX-L Archive at https://new-lists.princeton.edu/listserv/aix-l.html
New to AIX? http://publib-b.boulder.ibm.com/redbooks.nsf/portals/UNIX
N.B. Unsolicited email from vendors will not be appreciated.
Please post all follow-ups to the list.
> -----Original Message-----
> From: jeff barratt-mccartney [mailto:jbarratt@COMPSAT.COM]
> Sent: 10 February 2004 00:38
> To: aix-l@Princeton.EDU
> Subject: hacmp. whats wrong here?
>
>
> ok. I have been working on this cluster all day, and my brain
> is fried, so I
> have to ask a stupid question. what is wrong here?
>
> hacmp v5.1+requisite patches aix5.2ml2
>
> 2 nodes. simple cluster. I want to use IPAT via aliasing
>
> AIX1 has 2 network adapters
> en0 10.129.18.13 this is the service address, and is the only service
> address I want to use
> en1 172.16.101.1
>
> AIX2 has 2 network adapters
> en0 10.129.18.13
> en1 172.16.101.2
>
> netmask is 255.255.224.0
> all adapters can ping all adapters. no specific routing
> all 4 addresses are /etc/hosts
>
> when I try to make the 10.129.18.13 address a service ip/label, clver
> complains about not having enough adapters and not enough
> subnets for IPAT
> vias aliasing.
>
>
> the en# listed above are the adapters that currently have
> those addresses on
> them. boot address problem?
>
> what am i doing wrong? i have built a coupla of these before,
> but I am so
> deep into it, i can't see the forest for the trees.
> help

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:35 EDT