From: Drew Myers (myersd@VANGUARDCAR.COM)
Date: Wed Jan 21 2004 - 13:11:55 EST
I opened a call with IBM. I was told to shutdown the node,remove the
128 path from the node's profile, then restart.
That did the trick. I guess the console output was going a non-existant
path.
Thanks,
Drew
Bill Verzal wrote:
> What state does the HMC list the node? Is it "Running" ?
>
>
> BV
> --------------------------------------------------------
>
> "If everything is coming your way, then you are in the wrong lane"
>
> Bill Verzal
> AIX Administrator, Komatsu America
> (847) 970-3726 - direct
> (847) 970-4184 - fax
>
>
>
> Drew Myers
> <myersd@VANGUARDC
> AR.COM> To
> Sent by: IBM AIX aix-l@Princeton.EDU
> Discussion List cc
> <aix-l@Princeton.
> EDU> Subject
> Re: p670 HMC console problem
>
> 01/21/2004 10:29
> AM
>
>
> Please respond to
> IBM AIX
> Discussion List
> <aix-l@Princeton.
> EDU>
>
>
>
>
>
>
> Well, that's part of the problem. Since I can't open a terminal window,
> and the node doesn't have network connectivity, I'm limited in what I
> can check.
>
> Bill Verzal wrote:
>
>>Well, the HMC communicates across ther serial connection, so the IP
>
> address
>
>>should not matter.
>>Perhaps it is a problem with the node ?
>
>
>
>
>
>
>
>>>Morning all.
>>>
>>>Due to a recent move of a p670, I've been tasked with changing IP
>>>addresses, hostname, etc. However, when I attempt to access one LPAR
>>>from the HMC I get nothing but a blank screen. I can access the other
>>>LPAR (there are only 2) from the HMC as normal. Both LPARs were
>>>accessible prior to the move.
>>>
>>>I checked the SMS option, to ensure Console is enabled. Anything else I
>>>can check?
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:31 EDT