From: Support (support@XIATECS.NET)
Date: Wed Jan 21 2004 - 12:39:28 EST
This should put you in single user mode, but I believe it will not kill
off any active telnet sessions. It should not spawn any new connections
except for the system console. Check to see if you are in single user
mode by checking the output of "who -r", and ps -ef (you should only see
a handful of processes running).
Thanks,
_________________________________
Sukhjeet Singh
Senior Technology Consultant
IBM Certified Specialist - AIX
Xiatecs Systems Consultants Inc.
Tel: +1.514.668.0838
www.xiatecs.net - ssingh@xiatecs.net
_________________________________
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
Ayman Rayyan
Sent: Wednesday, January 21, 2004 11:53 AM
To: aix-l@Princeton.EDU
Subject: Single User Mode
Hi All:
I am trying to switch to single user mode by # telinit S, but nothing
were change ( ex: I am still reach the server from another host) , Could
any one advise ?
Host: 615
AIX V5.2 with maintenance level 2
Best Regards
_________________________________________________
Ayman Rayyan
IBM pSeries & AIX System Engineer
STS Group , Amman-Jordan
Tel : +962 6 5802626
Cell : +962 79 6925356
Fax : +962 6 5829213
Ayman.Rayyan@sts.com.jo
www.sts.com.jo
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:31 EDT