From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Wed Jan 21 2004 - 11:15:09 EST
Well, the HMC communicates across ther serial connection, so the IP address
should not matter.
Perhaps it is a problem with the node ?
BV
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
Drew Myers
<myersd@VANGUARDC
AR.COM> To
Sent by: IBM AIX aix-l@Princeton.EDU
Discussion List cc
<aix-l@Princeton.
EDU> Subject
p670 HMC console problem
01/21/2004 09:59
AM
Please respond to
IBM AIX
Discussion List
<aix-l@Princeton.
EDU>
Morning all.
Due to a recent move of a p670, I've been tasked with changing IP
addresses, hostname, etc. However, when I attempt to access one LPAR
from the HMC I get nothing but a blank screen. I can access the other
LPAR (there are only 2) from the HMC as normal. Both LPARs were
accessible prior to the move.
I checked the SMS option, to ensure Console is enabled. Anything else I
can check?
Thanks,
Drew
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:31 EDT