From: pSeries AIX Geek (aixgeek@YAHOO.COM)
Date: Tue Dec 30 2003 - 09:27:45 EST
Generally, the descriptive text is stored in the
errtmplt file, and this is populated when the driver
is installed. I don't know why these would have been
deleted, but I would reinstall your tape driver.
I'm guessing you're using Atape.driver or atldd?
- pAG
--- "Coyle, Jack" <Jack.Coyle@REXHEALTH.COM> wrote:
> I upgraded a stand-alone system from AIX 4.3.3 (ML
> 10) to AIX 5.1 (ML 4)
> earlier today. The migration was performed with the
> CDs. Since the upgrade,
> error log entries (at least those I have seen so
> far) no longer contain
> "meaningful" text under the DESCRIPTION heading,
> only four digit codes. For
> example, two that I get routinely on this particular
> server have identifiers
> of A7AB4C8F and E507DCF9. On AIX 4.3.3, these would
> be accompanied by the
> descriptive test "TAPE_MIM_SIM_RECORD" and
> "TAPE_DRIVE_CLEANING",
> respectively. Now, the former displays the code AAA0
> and the latter display
> the code AAA2. Does anyone know how I can "instruct"
> the error logger to
> report the descriptive text again instead of these
> codes? TIA for any and
> all information.
>
> Regards,
> Jack Coyle
> Rex Healthcare
> (919) 784-3792
> jack.coyle@rexhealth.com
__________________________________
Do you Yahoo!?
Find out what made the Top Yahoo! Searches of 2003
http://search.yahoo.com/top2003
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:26 EDT