From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Mon Dec 08 2003 - 14:00:11 EST
We have 2 MCA 7015-R30 that are still on IBM H/W support. You just can't go
AIX 5.2 S/W.
Kevin
-----Original Message-----
From: Robert Miller [mailto:rmiller@SMUD.ORG]
Sent: Monday, December 08, 2003 10:37 AM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] how long support for mca node?
My guess would be that it's been out of hardware support for a long
time, unless you have some sort of special maintenance agreement with
IBM. You will probably want to check with your CE or IBM rep and see
what's available.
Microchannel machines went the way of the dinosaur, at least as far as
support goes, a couple years ago IIRC...
--rm
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
fmu@OERAG.DE
Sent: Monday, December 08, 2003 9:55 AM
To: aix-l@Princeton.EDU
Subject: how long support for mca node?
Hi *,
I need an information, how long I receive still support for the hardware
from a mca-node (120MHz). I know, the node runs on AIX 5.1 and this
AIX-Version is supportet still april-2006. But what is with the
hardware?
Any link or information?
Best regards,
Frank Mueller
This electronic message transmission, including any attachments, contains
information from PacifiCare Health Systems Inc. which may be confidential or
privileged. The information is intended to be for the use of the individual or
entity named above. If you are not the intended recipient, be aware that any
disclosure, copying, distribution or use of the contents of this information
is prohibited.
If you have received this electronic transmission in error, please notify the
sender immediately by a "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:23 EDT