From: Williamson, Alan (alan.williamson@SIEMENS.COM)
Date: Thu Nov 27 2003 - 07:27:39 EST
no it's not via a PC X server.
I am comparing the attached graphics console when it is in telnet type mode
( straight after reboot )against it in graphics mode. (after I have started
dtsrc and logged onto the console via X )
Cheers,
Alan
> -----Original Message-----
> From: Green, Simon [mailto:Simon.Green@EU.ALTRIA.COM]
> Sent: 27 November 2003 11:56
> To: aix-l@Princeton.EDU
> Subject: Re: Enviroment queries / X
>
>
> This sounds like the keyboard definition is wrong, somewhere.
> Are you using a PC X server - e.g. Exceed? If so, check that
> the definition
> in here matches the definition in AIX.
>
> Simon Green
> Altria ITSC Europe Ltd
>
> AIX-L Archive at https://new-lists.princeton.edu/listserv/aix-l.html
>
> AIX FAQ at http://www.faqs.org/faqs/aix-faq/
>
> N.B. Unsolicited email from vendors will not be appreciated.
> Please post all follow-ups to the list.
>
> > -----Original Message-----
> > From: Williamson, Alan [mailto:alan.williamson@SIEMENS.COM]
> > Sent: 27 November 2003 11:37
> > To: aix-l@Princeton.EDU
> > Subject: Enviroment queries / X
> >
> >
> > All,
> >
> > I've just upgraded one of our F50's to AIX 5.1, Unfortunately
> > when I'm in X
> > windows the keyboard settings are wrong. - no pipe symbol
> > etc.. But when I
> > access the machine from the console with a non X session
> > everything is fine.
> > Are there any settings within X that I need to change, all
> > I've done is a
> > migrate to 5.1.
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:22 EDT