From: Eduardo Fraga (eduardo_fraga@IG.COM.BR)
Date: Tue Nov 11 2003 - 11:05:38 EST
Nothing. I waited more than 2 hours.
Thanks,
Eduardo Fraga
Em 11 Nov 2003, IBM AIX Discussion List escreveu:
>what happens after you typed 99 and pressed return? nothing?
>
>-----Original Message-----
>From: Eduardo Fraga [mailto:eduardo_fraga@IG.COM.BR]
>Sent: Tuesday, November 11, 2003 2:26 PM
>To: aix-l@Princeton.EDU
>Subject: Problem with wide node in sp2
>
>Hi,
>
>I try to boot a sp2 wide node in disk, diagnostics and maintanence
>options
>and I always have received the same error and the boot process hangs.
>
>Thanks,
>
>Eduardo Fraga
>
>spmon -d -> NODE13
>###########################################################
>1. Checking server process
> Process 4298 has accumulated 1 minutes and 1 seconds.
> Check successful
>
>2. Opening connection to server
> Connection opened
> Check successful
>
>3. Querying frame(s)
> 3 frames
> Check successful
>
>4. Checking frames
>
> This step was skipped because the -G flag was omitted.
>
>5. Checking nodes
>----------------------------------- Frame 1
>--------------------------------
>--
> Host Switch Key Env Front Panel
>LCD/LED
>Slot Node Type Power Responds Responds Switch Error LCD/LED
>Flashes
>---- ---- ----- ----- -------- -------- ------- ----- ----------------
>-----
>--
> 1 1 high on yes yes normal no LCDs are blank
>no
> 5 5 thin on yes autojn normal no LEDs are blank
>no
> 6 6 thin on yes yes normal no LEDs are blank
>no
> 7 7 thin on yes yes normal no LEDs are blank
>no
> 8 8 thin on yes yes normal no LEDs are blank
>no
> 9 9 thin on yes yes normal no LEDs are blank
>no
> 10 10 thin on yes yes normal no LEDs are blank
>no
> 11 11 thin on no yes normal no LEDs are blank
>no
> 12 12 thin on yes yes normal no LEDs are blank
>no
> 13 13 wide on no autojn N/A no LCDs are blank
>no
>########################################################################
>###
>
>Boot
>########################################################################
>###
>------------------------------------------------------------------------
>----
>---
> Welcome to AIX.
> boot image timestamp: 13:35 04/03
> The current time and date: 19:07:44 11/10/2003
> number of processors: 2 size of memory: 1024Mb
>boot device: /pci@fef00000/scsi@d/sd@0:2
>closing stdin and stdout...
>------------------------------------------------------------------------
>----
>---
>0514-440 cfgcon: failed to create log file: check path name,
>permissions,
>and available space
>
> Copy a System Dump to Removable Media
>
> The system dump is 83232768 bytes and will be copied from /dev/hd6
> to media inserted into the device from the list below.
>
> Please make sure that you have sufficient blank, formatted
> media before you continue.
>
> Step One: Insert blank media into the chosen device.
> Step Two: Type the number for that device and press Enter.
>
> Device Type Path Name
>
>>>> 1 IBM Magstar MP Tape Subsystem /dev/rmt0
> 2 IBM Magstar MP Tape Subsystem /dev/rmt1
> 3 ADSM Tape Drive /dev/mt0
> 4 Other SCSI Tape Drive /dev/rmt2
>
> 88 Help ?
> 99 Exit -- Warning, the dump will be lost!
>
>>>> Choice[1]: 99
>
>########################################################################
>#
>
>----------
_________________________________________________________
Voce quer um iGMail protegido contra vírus e spams?
Clique aqui: http://www.igmailseguro.ig.com.br
Ofertas imperdíveis! Link: http://www.americanas.com.br/ig/
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:20 EDT