Problem with wide node in sp2

From: Eduardo Fraga (eduardo_fraga@IG.COM.BR)
Date: Tue Nov 11 2003 - 08:26:04 EST

Hi,

I try to boot a sp2 wide node in disk, diagnostics and maintanence options
and I always have received the same error and the boot process hangs.

Thanks,

Eduardo Fraga

spmon -d -> NODE13
###########################################################
1. Checking server process
    Process 4298 has accumulated 1 minutes and 1 seconds.
    Check successful

2. Opening connection to server
    Connection opened
    Check successful

3. Querying frame(s)
    3 frames
    Check successful

4. Checking frames

    This step was skipped because the -G flag was omitted.

5. Checking nodes
----------------------------------- Frame 1 -------------------------------- 

--
                      Host     Switch   Key     Env   Front Panel
LCD/LED
Slot Node Type  Power Responds Responds Switch  Error LCD/LED
Flashes
---- ---- ----- ----- -------- -------- ------- ----- ---------------- -----
--
  1     1  high   on     yes      yes    normal   no  LCDs are blank      no
  5     5  thin   on     yes    autojn   normal   no  LEDs are blank      no
  6     6  thin   on     yes      yes    normal   no  LEDs are blank      no
  7     7  thin   on     yes      yes    normal   no  LEDs are blank      no
  8     8  thin   on     yes      yes    normal   no  LEDs are blank      no
  9     9  thin   on     yes      yes    normal   no  LEDs are blank      no
 10    10  thin   on     yes      yes    normal   no  LEDs are blank      no
 11    11  thin   on     no       yes    normal   no  LEDs are blank      no
 12    12  thin   on     yes      yes    normal   no  LEDs are blank      no
 13    13  wide   on     no     autojn    N/A     no  LCDs are blank      no
###########################################################################
Boot
###########################################################################
----------------------------------------------------------------------------
---
                                Welcome to AIX.
                       boot image timestamp: 13:35 04/03
                 The current time and date: 19:07:44 11/10/2003
                number of processors: 2    size of memory: 1024Mb
boot device: /pci@fef00000/scsi@d/sd@0:2
closing stdin and stdout...
----------------------------------------------------------------------------
---
0514-440 cfgcon: failed to create log file: check path name, permissions,
and available space
                Copy a System Dump to Removable Media
    The system dump is 83232768 bytes and will be copied from /dev/hd6
    to media inserted into the device from the list below.
    Please make sure that you have sufficient blank, formatted
    media before you continue.
    Step One:  Insert blank media into the chosen device.
    Step Two:  Type the number for that device and press Enter.
           Device Type                   Path Name
>>>  1  IBM Magstar MP Tape Subsystem    /dev/rmt0
     2  IBM Magstar MP Tape Subsystem    /dev/rmt1
     3  ADSM Tape Drive                  /dev/mt0
     4  Other SCSI Tape Drive            /dev/rmt2
    88  Help ?
    99  Exit -- Warning, the dump will be lost!
>>> Choice[1]: 99
#########################################################################

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:20 EDT