From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Tue Nov 04 2003 - 13:16:18 EST
"lsslot -c pci" will work on 4.3.3, but not on all models, i.e., it only
works on machines with hot swap slots, like H80, not S7A.
lsslot is friendlier than lscfg.
Kevin Adams
PacifiCare Behavioral Health
Principal Systems Analyst
AIX CATE
-----Original Message-----
From: Naylor, Jim [mailto:Jnaylor@SCHNUCKS.COM]
Sent: Tuesday, November 04, 2003 9:11 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] Find which slot an I/O card is in
Hello All,
Is there a command in AIX 4.3.3 that would tell which PCI slot an I/O card
is in (for instance a 128 port async adapter) on a RS/6000 43P Model 150?
This system is at a remote site.
Thanks,
Jim Naylor
Unix Systems Administrator
Schnuck Markets, Inc.
* Direct: (314) 994-4784
*)) Cell: (314) 691-0186
* Fax : (314) 994-4684
* jnaylor@schnucks.com
This electronic message transmission, including any attachments, contains
information from PacifiCare Health Systems Inc. which may be confidential or
privileged. The information is intended to be for the use of the individual or
entity named above. If you are not the intended recipient, be aware that any
disclosure, copying, distribution or use of the contents of this information
is prohibited.
If you have received this electronic transmission in error, please notify the
sender immediately by a "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:20 EDT