From: Patrick B. O'Brien (pobrien@DOIT.NV.GOV)
Date: Tue Nov 04 2003 - 12:30:43 EST
In diag look at, PCI Hot Plug Manager, then do a list from there.
-----Original Message-----
From: Bob Booth - UIUC [mailto:booth@UIUC.EDU]
Sent: Tuesday, November 04, 2003 9:21 AM
To: aix-l@Princeton.EDU
Subject: Re: Find which slot an I/O card is in
lscfg -vp
will give you the location code of each card plugged in. Using the service
guide, you can figure out which slot is which.
bob
On Tue, Nov 04, 2003 at 11:11:22AM -0600, Naylor, Jim wrote:
> Hello All,
> Is there a command in AIX 4.3.3 that would tell which PCI slot an I/O card
> is in (for instance a 128 port async adapter) on a RS/6000 43P Model 150?
> This system is at a remote site.
>
> Thanks,
> Jim Naylor
> Unix Systems Administrator
> Schnuck Markets, Inc.
> * Direct: (314) 994-4784
> *)) Cell: (314) 691-0186
> * Fax : (314) 994-4684
> * jnaylor@schnucks.com
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:20 EDT