From: fmu@OERAG.DE
Date: Mon Oct 27 2003 - 09:40:52 EST
Hi *!
The problem was a file with the name '1'
So the 'splstdata -b -l 1' - command means this file '1' would be a file
with a list of nodenumbers. When I start the command from another
directory, it runs fine.
Thanks for your help!
Best regards,
Frank Mueller
"Green, Simon"
<Simon.Green@EU.A An: aix-l@Princeton.EDU
LTRIA.COM> Kopie:
Gesendet von: IBM Thema: Re: splstdata - command fails after migration from a node
AIX Discussion
List
<aix-l@Princeton.
EDU>
27.10.2003 13:36
Bitte antworten
an IBM AIX
Discussion List
What PSSP fix set are you on?
I have a vague recollection of a PSSP 3.5 APAR for something like this.
Simon Green
Altria ITSC Europe Ltd
AIX-L Archive at https://new-lists.princeton.edu/listserv/aix-l.html
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will not be appreciated.
Please post all follow-ups to the list.
> -----Original Message-----
> From: fmu@OERAG.DE [mailto:fmu@OERAG.DE]
> Sent: 27 October 2003 11:01
> To: aix-l@Princeton.EDU
> Subject: splstdata - command fails after migration from a node
>
>
> Hi *,
>
> after the migration from one of our MCA wide nodes (AIX 4.3.3, PSSP
> 3.2 --> AIX 5.1_ML03, PSSP 3.5), the splstdata-commands to this one
> fails.
>
> # splstdata -b -l 1
> splstdata: 0022-108 You have supplied an incorrect node: 3993.
> Usage: splstdata { -A | -a | -b | -d | -g | -h | -i | -n | -s | -u
> | -v | -x }
> [ -G ] [ { start_frame start_slot {
> node_count | rest }
> | -N node_group | -l <node_list> } ]
> OR
> splstdata { -e | -f | -p | -X }
> (root:hermes_e)[/]
>
> For all other nodes the command functions and works fine. Exactly
> the same good result I get when I start the command global over all
> nodes without the option '-l'
>
> Verification test works all (SDR_test, SYSMAN_test, spmon_itest,
> spmon_ctest, spmon -d, .....)
>
> The error code means that I have a wrong node number, but
> this isn't so.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:18 EDT