From: Holger.VanKoll@SWISSCOM.COM
Date: Mon Oct 27 2003 - 06:21:41 EST
splstdata is a shell-script, so invoking it with ksh -x might give more
info
or use SDRGetObjects Node to compare sdr-data of a working node with
this one
-----Original Message-----
From: fmu@OERAG.DE [mailto:fmu@OERAG.DE]
Sent: Monday, October 27, 2003 12:01 PM
To: aix-l@Princeton.EDU
Subject: splstdata - command fails after migration from a node
Hi *,
after the migration from one of our MCA wide nodes (AIX 4.3.3, PSSP
3.2 --> AIX 5.1_ML03, PSSP 3.5), the splstdata-commands to this one
fails.
# splstdata -b -l 1
splstdata: 0022-108 You have supplied an incorrect node: 3993.
Usage: splstdata { -A | -a | -b | -d | -g | -h | -i | -n | -s | -u
| -v | -x }
[ -G ] [ { start_frame start_slot { node_count | rest }
| -N node_group | -l <node_list> } ]
OR
splstdata { -e | -f | -p | -X }
(root:hermes_e)[/]
For all other nodes the command functions and works fine. Exactly
the same good result I get when I start the command global over all
nodes without the option '-l'
Verification test works all (SDR_test, SYSMAN_test, spmon_itest,
spmon_ctest, spmon -d, .....)
The error code means that I have a wrong node number, but this isn't so.
What can I do?
Best regards,
Frank Mueller
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:18 EDT