From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Thu Oct 16 2003 - 11:36:00 EDT
You don't even need telnet.
>From the ASCII terminal:
export DISPLAY=<IP Address of other server:0.0>
xhost <same IP address>
orainst &
BV
--------------------------------------------------------
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
|---------+---------------------------->
| | John Dunn |
| | <john.dunn@SEFAS.|
| | CO.UK> |
| | Sent by: IBM AIX |
| | Discussion List |
| | <aix-l@Princeton.|
| | EDU> |
| | |
| | |
| | 10/16/2003 10:16 |
| | AM |
| | Please respond to|
| | IBM AIX |
| | Discussion List |
| | |
|---------+---------------------------->
>-------------------------------------------------------------------------------------------------------------------------------|
| |
| To: aix-l@Princeton.EDU |
| cc: |
| Subject: simple X windows question |
>-------------------------------------------------------------------------------------------------------------------------------|
All
I have 2 AIX boxes, 1 with an ascii terminal, one with a graphics terminal.
I want to run an X application(oracle install) on the server which has the
ascii console. Use of Exceed or similar not an option.
If, from the graphics console, I telnet to the server with the ascii
console, what DISPLAY settings and xhost command do I need to run to be
able
to kick off the X application?
This should be simple, but I can't seem to get it to work.
JD
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:17 EDT