From: Conran, John J (John.Conran@BHPSTEEL.COM)
Date: Wed Sep 17 2003 - 22:24:43 EDT
I have recently been assigned a new server to administer and have noticed
the
following error appearing frequently (every few minutes or so) in the syslog
Mar 27 11:12:55 viper tsm: /dev/lft0: 3004-028 - dup failed. OUTFD != -1
Tracking back on system changes, a graphics card was installed in the p630
server at around this date/time. The server also runs tsm client software
for
backups although I cannot be certain that the 'tsm' in the error actually
refers
to the backup software.
Does anyone have any insight into what is causing this error message.
The server runs AIX 5.1.
The console is defined as /dev/lft0.
There is no dumb terminal attached as tty0 although the server did
have one connected when it was originally delivered.
/etc/inittab has respawn of tty0 disabled.
thanks
John Conran
Computer Systems Support
Plate & Strip Quality & Technology Group
Integrated Markets
BHP Steel Ltd
Private E-mail: mandrake64< s p a m b o t>@bigpond.com
Live long and prosper.
But dont' just live ... THRIVE.
Note: If you are reading this Email and you are not one of the recipients
then how did you get it?
If you have recieved this Email by accident then watch out for the
ambulance.
Receipt of this Email does not give the recipient any rights to forward it
to other parties.
EOM
NOTICE - This message and any attached files may contain information that is
confidential and/or subject of legal privilege intended only for use by the
intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be advised
that you have received this message in error and that any dissemination,
copying or use of this message or attachment is strictly forbidden, as is
the disclosure of the information therein. If you have received this
message in error please notify the sender immediately and delete the
message.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:12 EDT