hacmp in a sp-environment

From: Holger.VanKoll@SWISSCOM.COM
Date: Tue Aug 26 2003 - 07:55:35 EDT

• Next message: Nguyen, Joseph: "Re: execute command within ftp session"
• Previous message: Mark Lamport: "Oracle on AIX 5.2"
• Next in thread: Raj Atwal: "Re: hacmp in a sp-environment"
• Reply: Raj Atwal: "Re: hacmp in a sp-environment"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

I have 2 4.3.3 nodes running hacmp. Both nodes reside in the same frame (yes, spof but $ rules the world).

Now I have to change speed and duplex-settings for en1 and en2. en1 is normal internet, en2 is internal (hampc-)net for those 2 nodes (192.168.x.x).

I could do this on the nodes but I dont want to get problems the next time those nodes have to be customized.
So I will do it on the CWS (sdr) and customize/boot the nodes.

I know that en1 has to be set to the boot-address. Thats already done and nothing will be changed here, so there wont be problems.

But en2 is what makes me worries. Currently it isn´t defined in the sdr at all. So I could reconfigure en2 on the nodes (regarding speed/duplex) and let the sdr as it is.
I dont see why this should cause problems - what do you think?

And what would I gain by putting and configuring en2 in the sdr?

Regards,

Holger

• Next message: Nguyen, Joseph: "Re: execute command within ftp session"
• Previous message: Mark Lamport: "Oracle on AIX 5.2"
• Next in thread: Raj Atwal: "Re: hacmp in a sp-environment"
• Reply: Raj Atwal: "Re: hacmp in a sp-environment"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:09 EDT