From: Peter Wuestefeld (Peter.Wuestefeld@SYSVA.DE)
Date: Thu Jul 17 2003 - 02:51:50 EDT
Two things to change, assuming that the terminal server is connected to
serial port S1:
smitty console -> PATHNAME of console: /dev/tty0
smitty tty -> TERMINAL type: vt100
That should work.
HTH,
Peter
Peter Wuestefeld M.A.
sysva GmbH - ein Unternehmen der SVA
Niederlassung Stuttgart
Wilhelm-Haas-Straße 6
70771 Leinfelden-Echterdingen
Büro: 0711 758595-40
Fax: 0711 758595-44
Mobil: 0151 12524406
SMTP: Peter.Wuestefeld@sysva.de
Somewhere found on the 'net:
=> Airconditioned. DO NOT open Windows. <=
"N. Leenders"
<nadine@UALBERTA. An: aix-l@Princeton.EDU
CA> Kopie:
Gesendet von: IBM Thema: console
AIX Discussion
List
<aix-l@Princeton.
EDU>
16.07.2003 21:35
Bitte antworten
an IBM AIX
Discussion List
We have a console server I'd like to configure an IBM 630 running AIX 5.2
to use. The console server basically emulates a dumb vt100 like terminal.
It looks to me like the IBM 630 is set up to only use an IBM 3151 type
console.
In the User's Guide for the 630, Appendix C lists "general attributes
required when using a tty terminal" and says "The following general
attributes are the default settings for the diagnostic programs. Be sure
your terminal is set to these attributes." Then it lists settings for
3151, 3161, and 3164 consoles. Does this preclude using a vt100 type
terminal for a console?
However, in the man page for chcons, there is an example for:
chcons /dev/lft0
except that I don't have a /dev/lft0 listed in /dev.
Can anyone shed some further light on this for me?
Thanks, Nadine
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:02 EDT