From: Librado Pamintuan (LPAMINTU@REGINA.CA)
Date: Fri Jul 04 2003 - 12:44:46 EDT
What we are trying to resolve is the backup performance.
Attached to this server is a StorageTek 9714 tape library with 6 DLT
7000 using 4 PCI Differential Ultra SCSI card.
The throughput capacity of the drives is 5 to 6 Mb/s, but when the FULL
backups runs, we are only getting 2 to 3 MB/s.
>>> john.jolet@FXFN.COM 07/04/03 10:28am >>>
depends on what you mean. you going to do etherchannel bonding, or
failover? or just two ip addresses? certainly, there's nothing wrong
with setting up two ip addresses, but you might want to make sure ip
routing is turned off if you do.
-----Original Message-----
From: Librado Pamintuan [mailto:LPAMINTU@REGINA.CA]
Sent: Friday, July 04, 2003 11:00 AM
To: aix-l@Princeton.EDU
Subject: Dual NICs
Good morning,
We have a RS/6000 7025 F50+ with the following specs:
2 Way PowerPC 604 332 MHz processor
2 Gb RAM
We are using this as our backup server for Legato Networker,
application and Oracle database server.
Does anybody has an experience in using/setting this server using dual
NIC cards? is there any risk involved? or is it possible to configure
this server with 2 NICs?
TIA,
Librado Pamintuan
Technical Support Analyst II
Information Systems Dep.
Operations Group
City of Regina
Phone: (306) 777-7573
General Fax: (306) 777-6804
eFax: (306) 546-6002
eMail: lpamintu@regina.ca
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:59 EDT