From: Christian Lair (Christian_Lair@I2.COM)
Date: Wed Jun 04 2003 - 15:25:27 EDT
Yes, we put in a 5.1 CD and created them.
"Page, Jennifer" <Jennifer.Page@RBCDAIN.COM>
Sent by: IBM AIX Discussion List <aix-l@Princeton.EDU>
06/04/2003 01:16 PM
Please respond to
IBM AIX Discussion List <aix-l@Princeton.EDU>
To
aix-l@Princeton.EDU
cc
Subject
Re: NIM install of 5.x from a 4.3 master?
Did you create the SPOT and lpp_source on the 4.3.3 machine?
-----Original Message-----
From: Gipson, Mat [mailto:Mat.Gipson@AMERICREDIT.COM]
Sent: Wednesday, June 04, 2003 12:53 PM
To: aix-l@Princeton.EDU
Subject: Re: NIM install of 5.x from a 4.3 master?
Well then...I guess you can do it.
Mathew Gipson
matt.gipson@americredit.com
817.525.7123
-----Original Message-----
From: Christian Lair [mailto:Christian_Lair@I2.COM]
Sent: Wednesday, June 04, 2003 10:55 AM
To: aix-l@Princeton.EDU
Subject: Re: NIM install of 5.x from a 4.3 master?
Well,
We just did 8 of them on to brand new P650's from our 4.3.3 ML11 NIM
master. We created a 5.1 SPOT and a 5.1 lpp_source. Then used a generic
mksysb via NIM to install the sytems. Didn't have any problems at all. I
guess nobody told our NIM server that it wasn't supposed to work.
Thanks,
Christian Lair
"Gipson, Mat" <Mat.Gipson@AMERICREDIT.COM>
Sent by: IBM AIX Discussion List <aix-l@Princeton.EDU>
06/04/2003 10:43 AM
Please respond to
IBM AIX Discussion List <aix-l@Princeton.EDU>
To
aix-l@Princeton.EDU
cc
Subject
Re: NIM install of 5.x from a 4.3 master?
No...the master must be at the same level or higher.
HTH,
Mathew Gipson
matt.gipson@americredit.com
817.525.7123
-----Original Message-----
From: Chris Price [mailto:cprice@ITS.TO]
Sent: Wednesday, June 04, 2003 10:16 AM
To: aix-l@Princeton.EDU
Subject: NIM install of 5.x from a 4.3 master?
Hi;
I am an admin in a primarily Solaris shop, with a few AIX boxes performing
some fairly critical work. I am moderately skilled in AIX administration,
but have not worked with NIM before. All of our existing AIX boxes are
installed and configured differently due to different admins doing each of
the installs. We would like to standardize our base install and NIM seems
to be a good way to go about it.
I will likely be sending a number of NIM related questions to the list
over the next couple of days, but my first question is;
Can I have a 4.3.x NIM master provide installation services for 5.1
clients?
Thanks,
Chris
RBC Dain Rauscher does not accept buy, sell or cancel orders by e-mail, or
any instructions by e-mail that would require your signature. Information
contained in this communication is not considered an official record of
your account and does not supersede normal trade confirmations or
statements. Any information provided has been prepared from sources
believed to be reliable but is not guaranteed, does not represent all
available data necessary for making investment decisions and is for
informational purposes only.
This e-mail may be privileged and/or confidential, and the sender does not
waive any related rights and obligations. Any distribution, use or copying
of this e-mail or the information it contains by other than an intended
recipient is unauthorized. If you receive this e-mail in error, please
advise me (by return e-mail or otherwise) immediately.
Information received by or sent from this system is subject to review by
supervisory personnel, is retained and may be produced to regulatory
authorities or others with a legal right to the information.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:54 EDT