From: Myers, Drew (MyersD@GOALAMO.COM)
Date: Tue May 20 2003 - 14:37:46 EDT
In my experience you shouldn't have any trouble with the ksh bit, but your
commands will likely change (AIX uses mkvg, HPUX uses vgcreate, etc).
This means your flag requirements will almost certainly be different as
well.
I'd suggest that you wait until the hardware arrives. But perhaps some more
experienced voices here have better/more accurate information.
PS, depending on your scripting needs, I might have some that could be
tweaked to fulfill your requirements. Shoot me an email if you're
interested.
Drew
-----Original Message-----
From: Theresa Sarver [mailto:tsarver.IFMC@SDPS.ORG]
Sent: Tuesday, May 20, 2003 2:33 PM
To: aix-l@Princeton.EDU
Subject: Porting ksh scripts?
Hi all;
Does anyone know -- will 'ksh' scripts, build on AIX [433], port to any/all
of the most current versions of the following OS's: HPUX, Solaris, Red Hat?
I ask because we'll be building a "test lab" with 1 of the above vendors (I
don't know which one yet) and I'd like to script as much of the LVM build
(mkvg, mklv, crjfs) as possible before the new hardware arrives....but only
if it the script(s) can be ported fairly simply.
Thanks in advance for the help!
Theresa
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:50 EDT