From: John Jolet (john.jolet@FXFN.COM)
Date: Tue May 13 2003 - 10:19:31 EDT
have you tried ln -s ?
-----Original Message-----
From: Liddle Craig - cliddl [mailto:CLIDDL@ACXIOM.CO.UK]
Sent: Tuesday, May 13, 2003 6:48 AM
To: aix-l@Princeton.EDU
Subject: Help renaming devices
Hi *
I have looked at the archives and someone has posted the same question but I
cannot see a solution.
Problem:
I need to change the name of my rmt devices to be in sync with that
of my TSM server for library sharing, i.e rmt1 on the client is rmt4 on the
server. I have tried using the rmdev/mkdev command
mkdev -c 'tape' -t '3580' -s 'fcp' -p 'fscsi0' -l rmt4
Method error (/etc/methods/cfgAtape):
0514-022 The specified connection is not valid.
Aix 5.1, 3584 with 3580's, fibre attached.
I have downloaded the Atape install/user guide but all I can see in there is
to use cfgmgr. There is a section on "New Logical Name" but does not
describe on how to do this.
Cheers
Craig
**********************************************************************
The information contained in this communication is
confidential, is intended only for the use of the recipient
named above, and may be legally privileged.
If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly
prohibited.
If you have received this communication in error,
please re-send this communication to the sender and
delete the original message or any copy of it from your
computer system. Thank You.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:49 EDT