From: Green, Simon (Simon.Green@EU.ALTRIA.COM)
Date: Tue Apr 15 2003 - 12:27:49 EDT
I'm not sure what "lssrc -l -s haem" is supposed to look like, so it's hard
to say!
All the HA daemons are running normally. There's a good host_responds, so I
don't think there's anything wrong with hats or haem.
I did find that sp_configd wasn't running - I don't know why. I re-started
it, and also re-started hardmon but that hasn't made any difference.
No sign of interesting logs. It looks like there may have been something up
with haem, but it sorted itself out early this morning. I don't think it's
relevant.
I'll take a look in the diagnostics guide for information on the various
daemons.
One other point: the S7A is part of an HACMP cluster. HACMP 4.4.1.
Simon Green
Altria ITSC Europe s.a.r.l.
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will not be appreciated.
> -----Original Message-----
> From: Holger.VanKoll@SWISSCOM.COM [mailto:Holger.VanKoll@SWISSCOM.COM]
> Sent: 15 April 2003 16:02
> To: aix-l@Princeton.EDU
> Subject: Re: Hardware monitoring for SP-Attached S7A incorrect
>
>
> is pman or haem logging anything on the s7a?
> does lssrc -l -s haem look ok?
>
> -----Original Message-----
> From: Green, Simon [mailto:Simon.Green@EU.ALTRIA.COM]
> Sent: Tuesday, April 15, 2003 4:45 PM
> To: aix-l@Princeton.EDU
> Subject: Hardware monitoring for SP-Attached S7A incorrect
>
>
> My SP2 - PSSP 3.2 Fix Set 19; AIX 4.3.3 ML08 - includes one
> SP-attached
> S7A.
>
> When I look at this through Hardware Perspectives, both the Power and
> TTY boxes are greyed out, with question marks. (That's on a table
> view.)
>
> When I look at the Node Status page of the properties, the
> power box (at
> the top of the page) is grey, with question marks, and the
> button to the
> right has no label. The TTY box and the "Open TTY..." button
> are missing
> entirely, as is the "Network Boot..." button.
>
> Host Responds and Switch Responds are both green and the server seems
> fine. All of the other nodes - including three SP-Attached p660s - are
> OK.
>
> I've been through the checks for SP-Attached servers in the PSSP
> Diagnosis Guide and everything appears to be OK: the serial
> connections
> are OK, all the daemons are running. I can't power off the system or
> take other major interventions as it's a critical production system.
>
> Has anybody seen this sort of thing before? Any suggestions
> for actions
> which will not interfere with the operation of this or any other
> systems?
>
> Simon Green
> Altria ITSC Europe s.a.r.l.
>
> AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
> AIX FAQ at http://www.faqs.org/faqs/aix-faq/
>
> N.B. Unsolicited email from vendors will not be appreciated.
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:45 EDT