From: Green, Simon (Simon.Green@EU.ALTRIA.COM)
Date: Tue Apr 08 2003 - 10:08:33 EDT
The standard PSSP documentation, (at the link Randy provided) is very good.
Be sure to read the "Read This First" document, as it contains information
on co-existence and pre-requisite fixes.
I have always found the Implementation and Migration Guide to be very good.
Just work through that and you should be OK.
Simon Green
Altria ITSC Europe s.a.r.l.
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will seldom be appreciated.
> -----Original Message-----
> From: Randy Fenrick [mailto:R.Fenrick@LABSAFETY.COM]
> Sent: 07 April 2003 21:32
> To: aix-l@Princeton.EDU
> Subject: Re: Upgrade Control Workstation to 5.1 from 4.3.3
> and PSSP 3.4
>
>
> Try this site at IBM.
>
> http://www-1.ibm.com/servers/eserver/pseries/library/sp_books/
> pssp.html
>
> -----Original Message-----
> From: Shawn Bierman [mailto:BiermanS@METHODISTHEALTH.ORG]
> Sent: Monday, April 07, 2003 11:01 AM
> To: aix-l@Princeton.EDU
> Subject: Upgrade Control Workstation to 5.1 from 4.3.3 and PSSP 3.4
>
>
> Greetings,
>
> I will be upgrading our Control Workstation to AIX 5.1 / PSSP
> 3.4 from its
> current version of AIX 4.3.3 / PSSP 3.2.
>
> I was wondering if anyone knew of any documentation from IBM on this
> scenario. Or, if anyone may have some to share. I've setup a 5.1/3.4
> Control Workstation at one of our other data-centers but
> never upgraded. So
> I'm looking to avoid any traps that may cause headaches.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:43 EDT