From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Wed Apr 02 2003 - 14:01:28 EST
I know autonegotiate is not a good idea and always hard setting is better,
but autonegotiate should pick up the Gigabit port setting. You should be
able to verify off the lights in the back of the card.
Kevin Adams
-----Original Message-----
From: pSeries AIX Geek [mailto:aixgeek@YAHOO.COM]
Sent: Wednesday, April 02, 2003 10:40 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] Gigabig Ethernet
What filesets do I have to install to support Gigabit
Ethernet?
Right now, the cards are set to "Autonegotiate" (and
they probably have been for a lont time). The network
guys tell me that the switch ports have been set to
1000/Full (gigabit).
But, I can't set the media_speed on the card to
1000_Full_Duplex; the only options are:
PdAt:
uniquetype = "adapter/pci/14100401"
attribute = "media_speed"
deflt = "Auto_Negotiation"
values =
"10_Half_Duplex,10_Full_Duplex,100_Half_Duplex,100_Full_Duplex,
Auto_Negotiation"
width = ""
type = "R"
generic = "DU"
rep = "sl"
nls_index = 59
# lsdev -Cc adapter | grep ent
ent0 Available 40-58 Gigabit Ethernet-SX PCI
Adapter (14100401)
ent1 Available C0-60 Gigabit Ethernet-SX PCI
Adapter (14100401)
Ideas?
Thanks,
-pAG
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:42 EDT