From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Fri Mar 21 2003 - 14:50:18 EST
Bill,
Nothing unless you attempt to access it from the same system that did the
flashcopy, in which case you need to do a recreatevg.
There are some limitations on which LUNS you can flashcopy to based on the
LSS, and other issues like quiesceing databases and so on.
You might already have it, but there is a recent redpiece out that has some
sample flash copy scripts:
http://www.redbooks.ibm.com/redpieces/pdfs/sg245757.pdf
This redpiece probably addresses all your concerns. It did not seem to
mention recreatevg though, at least when I searched.
Kevin Adams
-----Original Message-----
From: Bill Verzal [mailto:Bill_Verzal@BCBSIL.COM]
Sent: Friday, March 21, 2003 11:16 AM
To: aix-l@Princeton.EDU
Subject: [aix-l] SAN booting
Hi *,
I have a Regatta LPAR booted and installed from a Shark. It was
*painless*. Now, management would like to try the next step - Flashcopy.
Does anyone foresee any gotcha's doing this ? Nothing jumps out at me,
but you know how picky an O/S disk drive can be.
Thanks, Bill.
----------------------------------------------------------------------------
----------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
**********
The information contained in this communication is confidential, private,
proprietary, or otherwise privileged and is intended only for the use of the
addressee. Unauthorized use, disclosure, distribution or copying is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify the sender immediately at
(312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New
Mexico.
**********
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:41 EDT