From: Bill Verzal (Bill_Verzal@BCBSIL.COM)
Date: Fri Mar 21 2003 - 09:20:56 EST
Set multiboot to No
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
"Williamson, Alan" <alan.williamson@SIEMENS.COM>
Sent by: "IBM AIX Discussion List" <aix-l@Princeton.EDU>
03/21/2003 05:47 AM
Please respond to "IBM AIX Discussion List"
To: aix-l@Princeton.EDU
cc:
Subject: H80 and OpenFirmware Prompt at BootUp
Hi,
I have an H80 that has just started to stop booting properly. When we boot
it, it now stops with an OK prompt after the RS6000 splash screen and
after
the point where we would press 1 to go into SMS menus. I believe this is
the
Open Firmware prompt. If you type in "boot" the machine will then carry on
and boot up as normal, otherwise it will wait at the Ok prompt forever.
Does anyone know how I can get it to not stop at this prompt and boot up
automatically unless I press 1, or 5 etc..
This is giving us a problem as the machine is off site and we can nolonger
just reboot it remotely.
Thanks in advance,
Alan
**********
The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately at (312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New Mexico.
**********
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:41 EDT